U-type sleeve

U-type sleeve

The U-type sleeve is held between the outlet flanges and the bin activator. Its function is to ensure the seal between the moving bin activator and the static recovery unit. It allows isolation of the vibrations produced by the bin activator on the equipment positioned downstream.

This sleeve can be put in place of the flexible sleeve with tightening collars. This sealing system is perfectly adapted to withstand higher pressures than with a flexible sleeve. The installation of this seal requires a welded flange at the bin activator outlet. Before installing this sleeve, make sure that the flange welded to the downstream device is identical to that of the bin activator.