Your Bulk Handling Solution

Choose your product

Showing all 3 results

émotteur à démontage rapide pour accès facile au nettoyage

Lump-breaker with quick disassembly

Lump-breaker with quick disassembly

Our lump breakers are the ideal solution for crushing materials that tend to form lumps. These are created during the production or transport processes of friable powdered or granular materials.

The fast rotation of special knives through a fixed grid causes the crumbling of lumps. The presence of two rotors allows high throughputs.

With the quick disassembly, the motor-reducer/shaft assembly slides outwards, in order to facilitate the cleaning of the equipment. An X mm mesh is installed at the outlet to ensure a selected granulometry.

Double shaft lump breaker- stainless Steel

Lump-breaker with double crushing shaft

Lump-breaker with double crushing shaft

The lump breaker is an ideal solution to reduce the size grading of products tending to form lumps. Composed of a primary shaft and a secondary shaft rotating in opposite directions, this assembly allows the crushing of lumps that form during the transport of cohesive products.

It is available in different sizes, from the diameter 300 to the diameter 1000 mm and it can process a large quantity of product. The lump breaker with double crushing shaft allows flow of 40m³ of product per hour.

The lump breaker is integrated under the sealing and pre-transport system. Its limited height enables it to be easily integrated into processes where space is limited.

installation of an ISERCO single shaft lump breaker3D representation of a single shaft lump breaker - iserco

Lump-breaker with simple crushing shaft

Lump-breaker with simple crushing shaft

The lump breaker is used to crush a lumpy product so that it becomes fluid. Under no circumstances does the lump breaker act as a crusher and therefore cannot be considered as such.
The lump breaker is integrated under the sealing and pre-transport system. Its limited height enables it to be easily integrated into processes where space is limited.

It is available in different sizes, It is available in different sizes, from the diameter 300 to the diameter 1000 mm.
The lump-breaker with simple crushing shaft allows flow of 10m³ of product per hour.